40
•
Basic
Power source:
12 V DC, PoE (IEEE802.3af compliant)
Power consumption:
DC 12V : 930 mA/Approx. 11.2 W
PoE DC48 V : 260 mA/Approx. 12.5 W (Class 0 device)
Ambient operating environ-
ment:
–40 °C to +50 °C
{–40 °F to 122 °F}*
1
Ambient operating humidity: 10 % to 90 % (no condensation)
Monitor output (for adjust-
ment):
VBS: 1.0 V [p-p]/75 Ω, composite, RCA jack
An NTSC or PAL signal can be outputted from camera(use the
selector switch or software to select either NTSC or PAL
signal).
External I/O terminals:
ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/
ALARM IN 3 (AUX OUT) (x1 each)
DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used by
changing the settings of Terminal 1, Terminal 2, and Terminal 3.
Microphone/line input:
ø3.5 mm stereo mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
For microphone input:
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V±0.5 V
Recommended sensitivity of microphone: –48 dB±3 dB
(0 dB=1 V/Pa, 1 kHz)
For line input:
Input level: Approx. –10 dBV
Audio output:
ø3.5 mm stereo mini jack (stereo output)
Output impedance: Approx. 600 Ω (unbalanced)
External speaker with an amplifier
Output level: -20 dBV
Waterproof*
2
:
Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliant
Dimensions:
94 mm (W) x 89 mm (H) x 226 mm (L) {3-45/64 inches (W) x
3-1/2 inches (H) x 8-57/64 inches (L)}
Mass:
Approx. 1.4 k
g
{3.09 lbs}
Finish:
Main body:
Aluminum die cast (Light gray)
Dome cover:
Clear polycarbonate resin
*1 When using this product without turning the power off. (However, the temperature inside the
camera shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the
ambient temperature is -30 °C {-22 °F} or higher. The auto focus function is not available until
the heater unit of the camera raises the internal temperature of the camera.
*2 Only when installation work is properly performed according to the instructions in this book and
appropriate waterproof treatment is performed.
Specifications