Folding up and storing the tent
15
AFTER SALES SUPPORT
GB
IRE
00800/78747874
GB IRE
GB
IRE
5. If the inside of the outer tent or the inner tent is moist, undo the buttons connect-
ing the two tents as described in the chapter “Attaching the inner tent to the outer
tent” and let the two parts completely dry separately from one another.
6. Take all fibreglass poles
7
/
8
out of the tunnel guides
1
/
16
.
7. Place the tent with the top side down on a smooth, dry and clean surface.
8. Wipe the tent floor off with a damp, soft sponge or cloth with clean water or com-
mercially-available tent cleaner.
9. Let all parts dry completely.
You can now fold the tent up for storage as described in the chapter “Folding up and
storing the tent”.
Folding up and storing the tent
NOTICE!
Risk of mould.
Never fold the tent up when it is wet or dirty. Mould or odour may
form or the material may be discoloured.
− Clean the tent before you fold it up as described in the chapter
“Cleaning and care”.
1. Insert the fibreglass poles
7
/
8
in the pole bag
12
and close it (see
fig. A
).
2. Insert the pegs
9
in the peg bag
11
and close it.
3. Spread out the tent with the grey underside of the inner tent facing down (see
fig. H
).
4. If the outer tent and the inner tent are buttoned together, smooth the outer tent and
fold the corners together so that it is flush with the inner tent. Proceed with step 6.
5. If the outer tent and inner tent are not buttoned together, button them together
as described in the chapter “Attaching the inner tent together to the outer tent”.
6. Fold the tent up so that it has the width of the carrying bag.
7. Put the pole and peg bag in the middle of the tent.
8. Roll the tent up.
9. Store the tent in the carrying bag
10
.
