![Adventuridge FLX-DT-01 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/adventuridge/flx-dt-01/flx-dt-01_user-manual_2859149013.webp)
Use
13
AFTER SALES SUPPORT
GB
IRE
00800/78747874
GB IRE
GB
IRE
7. Lift one of the two fibreglass poles and push it no further than into the tunnel
guide until you can insert the metal pin
17
into the metal end of the fibreglass
pole to fix it in place (see
fig. B, C
and
D
).
The fibreglass pole will erect itself and is under tension.
8. Repeat this process with the other fibreglass pole.
9. Push the fibreglass pole
7
of the awning through the tunnel guide
1
on the
awning so that it extends evenly on both sides of the tunnel guide.
10. Insert the free metal pin on the one side of the fibreglass pole in the metal end of
the fibreglass pole.
11. Tension the fibreglass pole by sliding it all the way through the tunnel guide and
up against the metal pin. The fibreglass pole will bend.
12. Fix the tensioned fibreglass pole in place by inserting the free metal pin in the open
metal end.
13. Attach the two fastening hooks
18
to the two metal loops
19
on the front side of
the inner tent (see
fig. E
).
14. Attach the two fastening hooks to the plastic loops
20
on the back of the tent
(see
fig. F
).
15. Use the pegs to secure the tent by running the pegs through the fastening loop
6
of the inner tent and into the ground (see
fig. A
).
Make sure that the pegs do not protrude from the ground.
16. Close the entrances of the
3
/
15
inner tent and the awning.
17. Use the pegs to secure all fastening loops
14
on the outer tent in the ground.
Make sure that the outer tent is tensioned.
Make sure that the pegs do not protrude from the ground.
18. If necessary, attach the guy lines
2
to the tensioning triangles on the outer tent.
19. If necessary, use the guy lines to secure your tent against wind.
20. Open the ventilating windows
21
and secure them with the spacers
22
(see
fig. G
).
Your tent is now ready for use. If you would like to take down the tent, remove all ob-
jects and, if applicable, dirt from the tent and perform all steps in reverse order. If you
would like to fold the tent up and store it, proceed as described in the chapter “Folding
up and storing the tent”.