Advent NM100, Руководство пользователя

Страница: 9 / 12

GPS test will identify how many satellites are being received. Note the antenna is
located in the mirror housing. Do not place any object over the mirror housing or on the windshield above
the mirror or this will block the signal.
This will reset the mirror to all factory settings. This will delete all data, phone numbers,
and settings from the mirror. Use only when a full reset is required.
2.1 Standby and screen timeout
In order not to influence the driver’s rear-view judgment during traveling, you can switch to screen
standby and timeout mode by manual.
①
If you don’t operate the device after some time, it will automatically switch to the standby mode. And
if you touch the screen, it will switch to the system interface.
② During navigation with map displayed on the screen, if you press the navigation button , it will
turn to the safety navigation mode and the screen will only show the diversion and distance
information. Press the navigation button again and it will display the map with road
information on the screen.
③
Press the home button and it will go to the main menu interface. Press the home button
again and the screen will shut off. You can just use it like a normal rear-view mirror at this
time. If you want to use the navigation again, just press the home button to wake up the
screen.
2.2 Reverse camera
If you have a reverse camera connected to the mirror:
① When you switch to reverse gear, the screen will show the rear camera.
8