Advent NM100, Руководство пользователя

Страница: 4 / 12

2.
Press the Bluetooth Button (located on the bottom of a mirror) to enter the
Main Bluetooth Control screen. Next press the ‘Settings’ icon. Then Press the ‘Search
Device’ icon on the Bluetooth settings menu
.
Select
Select
3. After the ‘Search Device” process completes, you will then see a list of
devices those are ready to be connected. Choose the one you would like to
connect by touching it on the screen, and then touch the ‘LINK’ icon on the
right side of the screen next to the phone you have chosen.
4. Occasionally the screen may show ‘Connection Failed’, because the
Bluetooth module may try to connect to the previously connected
device (Auto-Reconnect Feature) or due to other devices or
interference in the area. Touch the ‘LINK’ icon again and the new
device will be connected. If your Phone did not show up in the list
insure that it is in discovery mode and press the refresh button.
5. If searching from your phone Select ‘Advent NM100’ on your phone, and
it will ask you to enter the pairing code used by the mirror unit. ( The
default code is 1234 ) Once the code is entered, your phone should
indicate the pairing process is successful.
6. Depending on the model of your phone, it may offer you the option of
connecting to the mirror unit whenever the mirror unit is on and in range
(approximately 10 feet, up to 30 feet distance) of your phone. If you do not
select this feature, you will need to manually connect your phone to the
mirror unit, either by using your phone’s menu to select and connect, or by
using the ‘Paired Devices’ selection in the mirror unit’s Bluetooth menu.
7. Note: If your phone does not locate the mirror unit, repeat the pairing
procedure, ensuring that you are within acceptable range and completing
the process within the 60-second period. If the pairing code is incorrect,
check to ensure that the code has not been changed on the mirror (see
‘Properties’ in the Settings menu for changing the “Pairing PIN Code.”)
3