Advent AMM12N, Инструкция по установке и эксплуатации

Страница: 24 / 44

20
AMM12N
Hardware Sub-menu Features
NOTE: To disable TFT backlight entirely, press and hold
the WIDE button to cycle to the "Standy" setting. Any
button press/screen contact will re-enable the TFT
backlight.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor returns to its original input
mode.
P.VOL Sub-menu Features
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETUP
menu, select the “TS CAL” option.
After entering calibration mode, a crosshair appears in a
corner quadrant of the screen. To begin calibration,
press and
hold the crosshair for one second until it moves to the next
quadrant. Continue for each quadrant until the calibration is
completed.
To exit without performing calibration, touch the BACK
button.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
Setting Options Function
Camera Normal
Mirror Reverse the camera image as if
looking through a rear-view mirror.
TFT Set
Open Auto The TFT panel automatically
retracts when turned off and
resumes its previous angle when
the unit is turned back on.
Manual The TFT panel maintains its angle
adjustment setting when the radio is
turned on/off.
Off The TFT panel automatically
retracts when turned off and DOES
NOT resume its previous angle
when the unit is turned back on.
Auto Dimmer On Auto Dimmer automatically adjusts
the TFT backlight depending on
ambient lighting conditions. When
ambient light is low at dusk or night-
time conditions, the TFT backlight
decreases (is not as bright as the-
daytime or default setting).
When ambient light is high during
daytime viewing, the TFT backlight
remains at the normal setting.
Off TFT screen backlight remains at a
constant setting.
Setting Options Function
Source DISC Choose a source for which you
would like to increase the relative
volume (LEVEL).
Use the +/- buttons to increase or
decrease the relative volume for the
specified source up to 6 decibels.
RADIO
SD
SAT
AUX 1
USB
BT
AUX 2
iPod
NAV