18
APPeNDIX D - INStAllINg the oPtIoNAl SMARtStReAM MoDUle (WM1)
This section is intended as an installation guide to connect the WM1 Module to the Unit
NOTE:
The WM1 Module is sold separately and is supplied with its own instruction manual.
Installing the wm1 module
1. Turn the DVD Player over on a surface with
protective covering to prevent scratches.
2. Begin looping the excess WM1 Module harness
under the protective top plate towards the
back of the DVD player as shown.
3. Place the WM1 Module onto the mounting
standoffs.
4. Locate the four #2.6 x 6mm Screws in the Unit
hardware kit.
5. Using a screwdriver, install the four screws into
the four locations shown.
Note:
Use caution tightening screws as the
threads may strip in the assembly.
WM1
Screw
24-pin Harness Connector
Screw
Back of Unit
Содержание ADVEXL12A
Страница 1: ...INSTALLATION GUIDE ADVEXL12A 12 1 OVERHEAD LED BACKLIT LCD MONITOR WITH DVD PLAYER AND HD INPUTS R ...
Страница 2: ......
Страница 23: ...NOTES 21 ...
Страница 24: ... 2016 VOXX ELECTRONICS CORP 180 Marcus Blvd Hauppauge NY 11788 730 101 ...