Advent ADVEXL12A, Руководство по установке

Страница: 14 / 24

12
INSTALLING ThE mOuNTING BrACkET
Installing the mounting Bracket
1. Once all the pre-wiring is complete, locate:
• Mounting Bracket
• (4) #4.3 x 10mm Self-Drilling Screws
2. Carefully align the Mounting Bracket in the location it is to be
installed with direction arrow facing the front of the vehicle (make
sure there is nothing between the Mounting Bracket and Roof
Cross-Member).
Note: The headliner may need to be cut to install the bracket. When
cutting the headliner, make sure no wires above the headliner are cut.
3. While holding the Mounting Bracket in place, install the
4- #4.3 x 10mm Self-Drilling Screws.
CAuTION: Be sure that the Self-Drilling Screws do not pierce the
outer roof skin when fully fastened to the Roof Cross-Member.
*
Self-Drilling Screws
Mounting Bracket
Headliner
Roof Cross-Member
Roof
(4 x Self-Drilling Screws - #4.3 x 10mm)
Mounting Bracket
*
CAUTION: Use extreme caution when using the
Self-Drilling Screws to avoid damage to vehicle
roof or other components, wiring, etc.
Front
of
Vehicle
Direction Arrow
Bracket
Mounting
Holes
(Top view of Bracket)