Advent ADVEXL10, Руководство по установке

Страница: 8 / 24

6
Installing the Shroud
1. Remove the double sided tape backing from the two strips on the
center section of the shroud.
2. Hook the shroud over the dome light and align the shroud tabs 1
with the eight openings around the rim of DVD player 2 .
3. Slide the shroud down until the shroud completely covers the
DVD player and that all eight tabs snap into all eight openings
around the DVD player 1 , 2 .
4. Apply pressure to the center section of the shroud in the area of
the double sided tape to ensure that the tape adheres.
5. Locate the
Slide Knob 3 in the hardware package and press it onto
the dome light switch 4 on the side of the DVD player.
Installing the Screen Cover
1. Open the LCD screen.
2. Hook the two tabs “A” (as shown) on the bottom edge of the
screen.
3. Carefully snap the opposite side over the hinge.
NOTE: If the wrong color Shroud and Screen Cover is installed, refer to
Appendix A of this manual for instructions to change the Shroud and
Screen Cover color.
INSTALLING THE SNAP-ON SHROUD AND SCREEN COVER
*NOTE: Work on a soft surface to avoid damaging the plastic.