Adveco EB0025, Руководство по эксплуатации продукта

Страница: 13 / 58

Is there hot water?
NO –
Does the water heater have power?
No – Test Main Isolator on Control Panel and CB2 then SGE thermocontroller.
Yes –
Is the SGE water heater displaying a fault?
No – SGE is working, check for plumbing faults in system.
Yes –
Did the restaurant receive an email fault notification?
No – Test SMS device, CB3, KA1, K1T, Error Relay.
Yes –
Is the Standby Immersion on? (is the LED on?)
Yes – Repair SGE water heater fault, test Immersion heater.
No – Test Immersion Heater, K1M, CB1, K1T and Error Relay.
YES –
Is the SGE water heater displaying a fault?
Yes –
Did the restaurant receive an email fault notification?
No – Test SMS device, CB3, KA1, K1T, Error Relay.
Yes –
Is the Standby Immersion on? (is the LED on?)
Yes – Repair SGE water heater fault, test Immersion heater.
No – Test Immersion Heater, K1M, CB1, K1T and Error Relay.
No –
Did the restaurant receive an email fault notification?
Yes – is the restaurant running on a generator, had power cuts, or had an engineer on
site carrying out any servicing activities?
No –
Does the Heat Recovery system run when the chiller or freezer runs?
No – Test Heat Recovery System.
Yes – Hot water system operating correctly.
EB0025
3. Troubleshooting
13
EB0025-EB0028-EB0030 Control Panel - Installation and maintenance manual