Advantek xLite T8-S Mk2, Руководство пользователя

Страница: 20 / 31

- 20 -
www.advateklights.com PixLite T8-S Mk2 User Manual V211013
If a static IP address is assigned to the controller, then the power LED will be solid from
power up.
6.2.2 - Using a Switch/Direct
It may be necessary to connect the controller to a network without a DHCP server or
even directly to the host machine instead of using a router. In this case (for first time
configuration) you will need to ensure that the network adapter of your computer is
set in the IP range that the controller will default to (controller defaults to 192.168.0.50).
This means your PC’s IP should be 192.168.0.xxx where xxx is anything between 1 and
254, other than 50. The subnet mask on your PC should be set to 255.255.255.0.
Note: The Advatek Assistant software will automatically detect if a controller is
connected to the network, even if it is outside the adapter’s IP address range. It will
prompt you to change the IP settings if this situation is discovered.
Once you can successfully discover the controller in the Advatek Assistant, we
recommended setting the controller to a static IP address other than the default.
Figure 19 shows a screenshot of typical computer network settings to communicate
with a PixLite T8-S Mk2 controller for the first time without a router.