Advantek PixLite R2F-S, Руководство пользователя, Страница: 6 / 15

- 6 -
www.advateklights.com PixLite R2F-S User Manual V200702
Receivers are connected to the transmitter via the RJ45 jacks on the rear panel of the
PixLite T8. Each jack is labelled with its output number 1-8. These ports are not network
ports, and should not be connected to any networking equipment, as shown in
Figure
4 below. They are specifically designed to connect a PixLite transmitter with a PixLite
receiver. For this reason, the standard network cable you use can be safely used in
excess of 300m.
Figure 4: Correct equipment to use
A typical setup is shown in Figure 5 below, which also shows how many pixels can be
run off each output.