Advantech UTC-200 Series, Руководство пользователя

Страница: 24 / 33

31
2.3 Setup Procedure
2.3.1 System Power On
For the UTC-207/210/220 model, connect the system to a power adaptor with 12V/7A input voltage. For
the UTC-232 models, connect the system to an AC power cable.
Hold power cords by the plugs ends only. Refer to Section 2.1 for the location of the DC/AC
power input and power switch.
Connect the power cord to activate the system.
2.3.2 BIOS Setup
For most UTC series, the system setup and configuration will be completed by the dealer or
system integrator prior to delivery. However, users may still need to access the BIOS setup
program to adjust the system configuration, such as the date/ time or hard drive type. The setup
program is stored in read-only memory (ROM) and can be accessed following system reset or
by pressing the
“Del” key after powering on the computer. The settings selected in the setup
program are recorded in CMOS RAM memory, which is backed up by a battery to ensure the
settings are retained after the system is powered off. When booting up, the system compares
the settings stored in CMOS RAM with the POST self test results. If a discrepancy is found, an
error mes- sage is displayed on screen and users are prompted to run the setup program.
2.3.3 System Software Installation
Recent releases of operating systems from major vendors include setup programs that load
automatically and guide users through hard disk preparation and operating system installation.
Some distributors and system integrators may have already installed software prior to
shipping the product.
Note! Before software or driver installation, the system must be equipped with additional
storage that users must purchase separately.
2.3.4 Driver Installation
After installing the system software, users can set up the Ethernet, XGA, audio, and
touchscreen functions.
Note! The relevant drivers and utilities are subject to change without notice.
Download the latest drivers for UTC series products from the Advantech website at
http://support.advantech.com or contact our application
engineers for further assistance