Advantech UNO-410 Скачать руководство пользователя

Страница: 2 / 66

UNO-410 User Manual

Copyright

The documentation and the software included with this product are copyrighted 2021

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

Acknowledgments

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor

poration.
Intel

, Core™ and Atom™ are the trademarks of Intel

Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.

Support

For more information on this and other Advantech products, please visit our website

at http://www.advantech.com.
*Address of Advantech: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District,

Taipei 114519, Taiwan
For technical support services, please visit our support website at http://sup

port.advantech.com/.
This manual applies to the following models. These are abbreviated as UNO-410

products in this article.
*Model:
Part number:
UNO-410-E1H
UNO-410-E1HX
UNO410E1Hxxxx-T
UNO410E1HXxxxx-T
UNO410E1HLxxxx-T
UNO410E1HXLxxxx-T

-E1: CPU series= Intel

ATOM™ E39xx

-H: Used in Hazardous locations
-X: Model with ATEX/IECEx certification
-L: Configurations with LTE module
-x: Numeric serial numbers

Part No. 2003041000

Edition 1

Printed in Taiwan

July 2021

Содержание UNO-410



































































Результаты поиска

Содержание UNO-410

Отзывы:

Похожие инструкции для UNO-410

Бренды по названию

Популярные бренды

Advantech UNO-410, Руководство пользователя

Результаты поиска

Содержание UNO-410

Отзывы:

Похожие инструкции для UNO-410

Бренды по названию

Популярные бренды