Advantech UNO-3072L, Руководство пользователя, Страница: 32 / 64

UNO-3072L User Manual 24
Figure 2.7: Isolated Digital Output Connection
Note: Please refer to Appendix A.3 Table A.6 for command of DO
Note: UNO-3072Lprovides built-in examples to show how to deliver
digital output functionality. Refer to console mode examples in C:\Pro-
gram Files\Advantech\UNO\UNO_IsaDIO\Examples\Console. (Please
install DI/O driver from the UNO CD to use these examples)
2.7 Onboard Isolated Counter/Timer
The UNO-3072Luses one 82C54 programmable timer/counter chip that
includes three independent 16-bit down counters: counter 0, counter 1 and
counter 2. Counter 0 and counter 1 are for users, and counter 2 is specified
for the system and can’t be used by user. Each counter has clock input, gate
input and pulse output. They can be programmed to count from 2 up to
65535 or cascaded into one 32-bit counter.
The UNO-3072Lhas two isolated counter input channels designated DI1
and DI3 with two isolated output channels designated DO2 and DO3.
Therefore, you can set each counter of 82C54 as counter function or timer
function.
2.7.1 Counter/Timer Control Register
The Counter/Timer Control Register controls the function and status of
each counter/timer signal source. Table 2.11 shows the bit map of the
Counter/Timer Control Register. The register is readable/writable register.
While being written, it is used as a control register; and while being read,
it is used as a status register.