Advantech UNO-1372G, Руководство пользователя

Страница: 21 / 38

11 UNO-1372G User Manual
Chapter 2
H
ardware
F
unctionality
2.14 Audio Jack
This product provides one Line-out port for local alarm functions.
2.15 LED Indicators
There are eight LEDs to indicate the status of the system power, power input 1,
power input 2, RTC battery, storage read/write, COM1~2 transmit/receive and PL1
for user’s configurations.
 PWR: Green means normal, orange means standby.
 PWR1, PWR2: Red means power input source is abnormal, check the power
input source.
 RTC: Red means RTC battery abnormal, check the RTC battery.
 HDD, COM1~2: Flashing green means signals are being transmitted and
received.
 PL 1: User can configure the LED indicators’ behavior through GPIO control.
2.16 Digital Input and Output
There are four digital inputs and four digital outputs configured from GPIO pins for
most of on/off trigger and status reading.
Digital Input
 Input Channels 4
 Input Voltage (Wet Contact), Configure SW7 to 1,3
– Logic 0: 0~3 V
DC
– Logic 1: 10~30 V
DC
 Input Voltage (Dry Contact), Configure SW7 to 2,4
– Logic 0: Open
– Logic 1: Shorted to GND
 Input Current
– 10 V
DC
@ 2.67mA
– 20 V
DC
@ 5.64mA
– 30 V
DC
@ 8.91mA
 Isolation Protection 2,500 V
DC
 Overvoltage Protection 30 V
DC
 ESD Protection 4KV (Contact), 8KV (Air)

Opto-Isolator Response 50 μ s
Digital Output
 Channels 4

Output Voltage: 5~30V
DC
 Output Capability Sink: 24 mA max./channel

Opto-Isolator Response 50 μ s