35
TPC-B610 User Manual
C
ha
pte
r 3
BIO
S S
etu
p
Legacy USB Support
This is for supporting USB device under legacy OS such as DOS. When choos
-
ing Auto, the system will automatically detect if any USB device is plugged into
the computer and enable USB legacy mode when a USB device is plugged and
disable USB legacy mode when no USB device is plugged.
XHCI Hand-off
This is a workaround for OS without XHCI hand-off support. The XHCI owner
-
ship change should be claimed by XHCI driver.
USB Mass Storage Driver Support
Enable or Disable USB Mass Storage driver support.
USB transfer time-out
Allows you to select the USB transfer time-out value. [1,5,10,20sec]
Device reset time-out
Allows you to select the USB device reset time-out value. [10,20,30,40sec]
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. Auto uses default value: for a Root port it is 100 ms, for a Hub port
the delay is take from Hub descriptor.
3.2.2.14
USB Network Stack Configuration
Figure 3.20 Network Stack
Network Stack
"Enable or Disable" UEFI Network Stack.
Содержание TPC-B610
