Advantech SmartFlex Series, Руководство пользователя

Страница: 13 / 20

SmartFlex
1. Antenna
Use an SMA connector to connect the antennas to the router. The main antenna is con-
nected to the router by screwing on the
ANT
connector (see the figure below). A second
diversity antenna can also be connected to the DIV connector to improve performance.
2. SIM card
The SIM card readers, for 3 V and 1.8 V SIM cards, are located on the rear panel of the
router. If you intend to use this device to communicate over a cellular network, please place
an activated data-provisioned SIM card with an unblocked PIN into the SIM card reader. Push
your SIM card into the
SIM1 or SIM2 slot until it clicks in place.
Before handling the SIM card disconnect the router from the power supply!
QSG-0002-EN, January 24, 2020 12 Released in the Czech Republic