Advantech SKY-8260S Скачать руководство пользователя страница 15

Страница: 15 / 116

SKY-8260S Manual V02 20220411

Page 15

6. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

7. All cautions and warnings on the equipment should be noted.

8. If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

9. Never pour any liquid into an opening. This may cause fire or electrical shock.

10. For safety reasons, the equipment should be opened only by qualified service

personnel.

11. If one of the following situations arises, get the equipment checked by service

personnel:

12. The power cord or plug is damaged.

13. Liquid has penetrated into the equipment.

14. The equipment has been exposed to moisture.

15. The equipment does not work well, or you cannot get it to work according

- The equipment has been dropped and damaged.

- The equipment has obvious signs of breakage.

Note!

Do not leave this equipment in an environment where the storage temperature
may go beyond the range specified in

Technical Specifications

. This could

damage the equipment. The equipment should be in a controlled environment.

Caution!

Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer, discard used
batteries according to the manufacturer

’s instructions.

16. The sound pressure level at the operator

’s position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER:

The set of instructions is given according to IEC704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

1.1.2 Safety Precautions

–

Static Electricity

Follow instructions below to protect yourself from harm and the products from damage:

1. Don

’t touch any components inside the system while the system is on.

2. Disconnect power before making any configuration changes. The sudden rush of

power as you connect a jumper or install a card may damage sensitive electronic
components.

3. When unpacking a static-sensitive component from its shipping carton, do not

remove the component's antistatic packing material until you are ready to install
the component in the unit.

4. When transporting any electrical component, first place it in an antistatic

container or packaging.

Содержание SKY-8260S




















































































































Результаты поиска

Содержание SKY-8260S

Отзывы:

Бренды по названию

Популярные бренды

Advantech SKY-8260S, Руководство пользователя

Результаты поиска

Содержание SKY-8260S

Отзывы:

Бренды по названию

Популярные бренды