Advantech SKY-8232D, Руководство пользователя

Страница: 19 / 133

SKY-8232D Manual V02 20220411 Copyright 2022 Advantech Co. Ltd. All rights reserved Page 19
1.3.2 Powering On
Caution!
Before connecting the SKY-8232D to the power outlet, please make sure that
the power rating of the outlet and the SKY-8232D
’s PSU match. Please also
make sure that the primary circuit and all power distribution in not overloaded.
Inrush current and steady state power specifications for the SKY-8232D can be
found at the type label on the bottom of the unit.
Connect the power cords to the PSU modules first and then to the power outlets.
The unit will automatically power on after power is supplied. The green LED on the front
panel should be lit as the unit is under power.
Please refer to
Section 2.4 for the location of front and rear panel elements.
1.3.3 Connecting to Monitor, Keyboard and Mouse
The SKY-8232D supports two VGA Ports and four USB ports for connection of a
monitor, keyboard and mouse. Please refer to
Section 2.4 for information on the
location of the related connectors.
1.3.4 Connecting to the Serial Console
The SKY-8232D supports the operation via a serial terminal connection by default for
scenarios where a directly attached monitor, keyboard and mouse are not available or
not desirable. In this configuration, BIOS output as well as OS output are provided via
a serial terminal connection.
The remainder of this section describes how to configure PuTTY on a Windows plat-
form for connection with the SKY-8232D serial console as a reference. Other
terminal programs may be used in a similar way as well.
Open up PuTTY and begin the configuration as shown below. Please use the
actual COM port
’s number on the client machine instead of “COM1”
.
1. Specify
“COM1”
under serial line and
“115200”
for speed, no parity, no flow
control.
2. Check Serial for connection type.
3. Check
“VT100+”
for keypad in the keyboard submenu.
4. Check
“Colour”
or
“Both”
for
“Indicate bolded text”
in the colours submenu.
5. Click the
“Open”
button and a PuTTY terminal screen will appear.