Advantech SIMB-A01, Руководство пользователя

Страница: 61 / 74

55 SIMB-A01 User Manual
Chapter 3
B
IOS Setup
„
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system. Configuration options: [Disabled] [Enabled].
„
Initiate Graphic Adapter [PEG/PCI]
Allow you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI].
„
Internal Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal graph-
ics device. Configuration options: [Disabled] [Enabled,1MB] [Enabled, 8MB].
„
PEG Port Control [Auto]
Allows you to disable or enable PEG port control.
Configuration options: [Auto] [Disabled].
„
Video Function Configuration
DVMT Mode Select, Configuration options: [Fixed Mode] [DVMT Mode].
DVMT/FIXED Memory, Configuration options: [128MB] [258MB] [Maximum
DTMT].
Spread Spectrum Clock, Configuration options: [Disabled] [Enabled].
„
CPU Clock Spread Spectrum
Configuration options: [Disabled] [Enabled].
„
PCI Express Clock Spread Spectrum
Configuration options: [Disabled] [Enabled].
3.2.2.7 Onboard Device Configuration
Note! The Video Function Configuration item shows when you set this option
to [Enabled, 1MB] or [Enabled, 8MB].
Note! The following item shows when you set this option to [Auto].