manualshive.com logo in svg

Advantech PPC-105, Руководство пользователя

Поделиться
Скачать
Advantech PPC-105 Скачать руководство пользователя страница 89

Chapter 8

Award BIOS Setup

77

7.4 BIOS Features Setup

Moving around the BIOS Features and Chipset Features setup pro-
grams works the same way as moving around the Standard CMOS
setup program. (Refer to the next section for Chipset Features setup.)
The BIOS Features setup program is shown above. Users are not
encouraged to run the BIOS and Chipset Features setup programs.
Your system should have been fine-tuned before shipping. Improper
setup may cause the system to fail, so consult your dealer before
making any changes.

Virus Warning

When enabled, it assigns the BIOS to monitor the master boot sector
and the DOS sector of the first hard disk drive.

The options are: Disabled (Default), Enabled.

CPU Internal Cache

When enabled, it improves system performance. Disable this item

Figure 7-3: BIOS features setup screen

Содержание PPC-105

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды