Advantech PPC-105, Руководство пользователя

Страница: 33 / 128

Chapter 2 System Setup 21
2.4.9 USB ports
The external USB device may be connected to the system though the
4-pin USB ports located on the rear side of the system unit.
1. Connect the external system to the system
2. The USB ports support hot plug-in connection. You should install
the device driver before you use the device.
2.5 Installing Software to the HDD
Installing software requires an installed HDD. Software can be loaded
in the PPC-105 using any of four methods:
2.5.1 Method 1: Use the Ethernet
You can use the Ethernet port to download software to the HDD.
2.5.2 Method 2: Use an FDD
The FDD port is located on the rear panel. Unscrew the two screws
and detach the metal plate. Attach a communication cable and a power
cable to the FDD port, then attach them to an FDD. Insert a disk
containing the software and consult your software manual for installa-
tion procedures.
2.5.3 Method 3: Use the COM or parallel port
You can use Lap Link 6 or similar transmission software. Connect
another PC to the PPC-105 with an appropriate cable and transmit the
software to the PPC-105.
2.5.4 Method 4: Use a 3.5" HDD or CD-ROM
Please refer to Section 2.4.1 "Installing one secondary HDD/CD-ROM
device (external)".
Microphone-in: Use an external microphone to record voice and
sound.
Line-ouit: Output audio to external devices such as speakers or