Advantech POD-6704 Series, Руководство пользователя

Страница: 31 / 120

Chapter 2 Installation 25
2.6 Adding System Memory (DIMM)
You can install anywhere from 64 to 512 MB of SDRAM into your
POD-6704 series card. The card is provided with a
168-pin DIMM
socket, which accepts 32, 64, 128, 256, or 512 MB 3.3 V power level
DIMMs.
Note: The POD-6704 card supports SDRAM DIMM
modules.
2.6.1 Installing DIMMs
Note:The modules can only fit into the socket one way. Their
gold pins must point down into the DIMM socket.
The procedure for installing DIMMs appears below. Please follow
these steps carefully.
1. Ensure that all power supplies to the system are switched Off.
2. Install the DIMM card. Install the DIMM so that its gold pins
point down into the DIMM socket.
3. Slip the DIMM into the socket at a 45 degree angle and
carefully fit the bottom of the card against the connectors.
4. Gently push the DIMM until the clips on the ends of the
DIMM sockets snap into place.
5. Check to ensure that the DIMM is correctly seated and all
connector contacts touch. The DIMM should not move around in
its socket.