manualshive.com logo in svg

Advantech PCM-9550F, Руководство пользователя

Поделиться
Скачать
Advantech PCM-9550F Скачать руководство пользователя страница 45

Chapter 2  Installation

33

2.22 Ethernet configuration

The PCM-9550F/FM/L is equipped with a high performance 32-bit
PCI-bus Ethernet interface which is fully compliant with IEEE
802.3U 10/100Mbps CSMA/CD standards. It is supported by all
major network operating systems.

The medium type can be configured via the RSET8139.EXE
program included on the utility disk. (See Chapter 3 for detailed
information.)

2.22.1 100Base-T connector (CN16)

10/100Base-T connects to the PCM-9550F/FM/L via an adapter
cable to a 10-pin polarized header (CN6).

2.22.2 Network boot

The Network Boot feature can be utilized by incorporating the
Boot ROM image files for the appropriate network operating
system. The Boot ROM BIOS files are included in the system
BIOS, which is on the utility CD disc.

2.22.3 LAN controller power select (J6)

Table 2-11: LAN controller power select (J6)

3.3 V*

Standby 3.3 V

* default setting

Note:

PCM-9550F/FM/L supports Wake-on-LAN. For
Wake-on LAN, J6 has to be set to the Standby
3.3 V (2-3) position

1

1

Содержание PCM-9550F



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды