manualshive.com logo in svg

Advantech PCM-9550F, Руководство пользователя

Поделиться
Скачать
Advantech PCM-9550F Скачать руководство пользователя страница 2

Copyright Notice

This document is copyrighted, 2000. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties that may result from
such use.

Award is a trademark of Award Software International, Inc.
C&T is a trademark of Chips and Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows

®

 is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
SiS is a trademark of Silicon Integration Systems Corporation
UMC is a trademark of United Microelectronics Corporation.
IDT is a trademark of Integrated Device Technology , Inc.
Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their respec-
tive owners.

For more information on this and other Advantech products, please
visit our websites at:

http://www.advantech.com
http://www.advantech.com/epc

For technical support and service, please visit our support website at:
http://support.advantech.com

This manual is for the PCM-9550F and PCM-9550FM, and PCM-9550L.

 Part No. 2006955013

                                     5th Edition    Printed in Taiwan   ©March 2003

Acknowledgments

Содержание PCM-9550F



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды