Advantech PCM-3342, Руководство пользователя

Страница: 28 / 60

PCM-3342 User Manual 20
This item allows IDE block data transfer mode to be enabled or disabled. This
setting will speed up HDD data transfer efficiency. The Bios default value is set
to “Enabled”.
! Onboard FDC Controller [Enabled]
This item specifies an onboard floppy disk drive controller.
! Onboard Serial Port 3 [3E8]
This option is used to assign the I/O address and IRQ for the onboard serial
port.
! Serial Port 3 Use IRQ [IRQ10]
This option is used to assign the Serial Port 3 Use IRQ.
! Onboard Serial Port 4 [2E8]
This option is used to assign the I/O address and IRQ for the onboard serial
port.
! Serial Port 4 Use IRQ [IRQ5]
This option is used to assign the Serial Port 4 Use IRQ.
!
Onboard Parallel Port [378/IRQ7]
This item allows you to determine onboard parallel port controller I/O address
and IRQ.
! Parallel Port Mode [Standard]
Select an operating mode for the onboard parallel port.
! ECP Mode Use DMA [3]
When the onboard parallel is set to ECP mode, the parallel port can use DMA3
or DMA1.