Advantech PCL-846 Series, Руководство по установке

Страница: 24 / 42

20 PCL-846/847 User's Manual
Operating Environment Selection
Set jumper 15 (JP15) to correspond with your desired software
operating environment. Connect the left two pins of JP15 to operate in
DOS or Windows 3.1 mode, as shown below. Connect the right two
pins to operate in Windows 95 or Windows NT mode .
JP15 JP15
DOS, Windows 3.1 Windows 95, Windows NT
Driver Installation for DOS Users
Make a duplicate copy of the driver diskette in case the original disk
becomes lost or damaged. Copy the files to a subdirectory on your
hard disk if you wish.
The PCL-846/847 comes with the PC-ComLIB software package. PC-
ComLIB provides software drivers for DOS which supports most
common languages, including C, PASCAL, BASIC, Quick BASIC,
Assembly and Clipper. PC-ComLIB also includes the DataScope data
viewer, terminal emulator and self-diagnostics utilities for easy
troubleshooting and debugging. Please see the PC-ComLIB manual
for detailed information.
Card setup
The PCL-846/847's driver determines the configuration of the
installed cards by reading a data file,
GEN-DRV.CNF.
When you
first install the PCL-846/847, and each time you change the card's
address and IRQ, you will need to run the card setup program to save
the settings to the configuration file.
Program files should be installed to the hard disk. Insert the driver
disk in your computer, type DOSINST from the A: (or B:) prompt and
press enter. Once the files have been installed, type SETUP from the
\COMLIB\BIN prompt and press ENTER. You will then see the
screen on the following page.
1
1