Advantech PCL-843, Руководство пользователя

Страница: 15 / 36

Chapter 2 Hardware Installation 9
Configuration software/jumper (JP4)
As already mentioned you can configure the PCL-843 with the above
jumpers or via the software utility. This option is selected via pins 3
and 4 on jumper JP4, as shown below:
Software Jumpers (default)
Interrupt level (IRQ) setting (JP2)
The PCL-843 card is designed to access interrupt levels 2 up to level
12 with the exception of 7, 8, and 9. Simply place the jumper link on
the required interrupt level as shown below:
IRQ 3 (default)
The table below shows the possible IRQ settings available for the
PCL-843. Ensure that the IRQ does not conflict with any other card's
IRQ you that you have installed in your system .
PCL-843 IRQ Settings (JP2)
IRQ Pin 1-2 Pin 3-4 Pin 5-6
2
¡ ¡ ¡
3
¡ ¡ l
4
¡ l ¡
5
¡ l l
6
l ¡ ¡
1 0
l ¡ l
1 1
l l ¡
1 2
l l l
l
:Close
¡
:Open *:Default
1
2
3
4
1
2
3
4
1
3 5
2 4 6
*