manualshive.com logo in svg

Advantech PCL-841 Series, Руководство пользователя

Поделиться
Скачать
Advantech PCL-841 Series Скачать руководство пользователя страница 27

2 6

PCL-841 Series User's Manual

Terminal

This function provides a direct way to:

1. Send data over the CAN network.

2. Test CAN transmission.

Select <Terminal> from the menu bar for the following screen:

Transmitting data

To transmit data, the PCL-84 I must be connected to a CAN network
with at least one node and the configuration for the card must be
complete.

First, select <Terminal> to edit the data. Enter the port, the object ID
.and the data bytes as hexadecimal value. Press <Enter> to begin data
transmission. If the CAN controller is configured correctly and the
transmission has been successfully completed every CAN object will
be shown in order of appearance at the left side of the screen.

Testing data transmission

To test CAN transmission without actually sending, connect Port I to
Port 2 on the PCL-841. Select <Terminal> and enter port I as trans
mitting port. Port 2 will therefore be designated as receiving port.

Note: To send Data Frame (Transmit), enter “O” for RTR. If you want
to send Remote Frame (Request), enter  "1" for RTR.

Содержание PCL-841 Series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды