Advantech PCL-841 Series, Руководство пользователя

Страница: 24 / 37

Chapter 4 DataMonitor Utility 23
Configuration
Before you transmit a CAN object, you must configure the CAN
controller by selecting the <Config> menu with the cursor keys and
pressing <Enter>. The Configuration function determines the ports to
be used and their communication parameters.
The port configuration window is shown below.
The parameters below need to be configured for each CAN controller:
Address segment: The base address (address segment) of the PCL-
j 841 is normally adjusted during the installation
process. The selection of the address segment
needs to be the same as that of the hardware
configuration.
Port: Select the port you want to configure.
Baud rate: The baud rate must be coordinated with the
CAN network. Choose the appropriate one from
the list of baud rates.
Acceptance code: Specifies the value of the 8 most significant bits
of the identifier (ID 10 ... ID 3)