Advantech PCIE-1203, Руководство пользователя

Страница: 17 / 24

11 PCIE-1203 User Manual
C
ha
pte
r 2
In
sta
lla
tio
n
2.3 Hardware Installation
After the DLL driver installation is completed, you can now go on to install the PCIE-
1203 card in any PCI slot on your computer. But it is suggested that you refer to the
computer’s user manual or related documentations if you have any doubt. Follow the
steps below to install the card on your system.
1. Turn off your computer and remove any accessories connected to the computer.
2. Disconnect the power cord and any other cables from the back of the computer.
3. Remove the cover of the computer.
4. Select an empty +3.3/+5 V PCI Express slot. Remove the screws that secures
the expansion slot cover to the system unit. Save the screws to secure the
retaining bracket of interface card.
5. Carefully grasp the upper edge of the PCIE-1203 series. Align the hole in the
retaining bracket with the hole on the expansion slot and align the gold striped
edge connector with the expansion slot socket. Press the card into the socket
gently but firmly. Make sure the card fits the slot tightly. Use of excessive force
must be avoided; otherwise the card might be damaged.
6. Fasten the bracket of the PCI Express card on the back panel rail of the com -
puter with screws.
7. Connect appropriate accessories (cable, wiring terminals, etc. if necessary) to
the PCI Express card.
8. Replace the cover of your computer and connect the cables you removed in
step 2.
9. Turn on your computer.
Note!
Make sure you have installed the driver first before you install the card
(refer to2.2 Driver Installation).
Warning! CUT OFF power supply of your computer whenever you install or
remove any card, or connect and disconnect cables.