Advantech PCI-1727U, Руководство пользователя

Страница: 22 / 42

13 Chapter 2
2.3 Hardware Installation
After the Device Drivers installation is completed you can install the PCI-
1727U card into any PCI slot on your computer. A complete device
installation procedure should include device setup, configuration and test-
ing. The following sections will guide you through the Setup, Configura-
tion and Testing of your device. However, it is suggested that you refer to
the computer’s user manual or related documentation if you have any
doubts. Please follow the steps below to install the card.
1. Turn off your computer and unplug the power cord and cables.
2. Remove the cover of your computer.
3. Remove the slot cover on the back panel of your computer.
4. Touch the metal part on the surface of your computer to neutralize the
static electricity that might be on your body.
5. Insert the PCI-1727U card into a PCI slot. Hold the card only by its
edges and carefully align it with the slot. Insert the card firmly into
place.
6. Fasten the bracket of the PCI card on the back panel rail of the com-
puter with screws.
7. Connect appropriate accessories (50-pin flat cable, wiring terminals,
etc. if necessary) to the PCI card.
8. Replace the cover of your computer chassis. Re-connect the cables you
removed in step 2.
9. Plug in the power cord and turn on the computer.
After your card is properly installed on your system, you can now config-
ure your device using the
Advantech Device Manager Program that has
itself already been installed on your system during driver setup.
Note: Make sure you have installed the driver and
Advantech Device Manager before you install the
card (please refer to chapter 2.2 Driver Installation)