Advantech PCA-6004 Скачать руководство пользователя страница 67

Страница: 67 / 106

Chapter 5 LAN Configuration

5 3

5.3 Driver Installation

The PCA-6004's onboard Ethernet interface supports all major network
operating systems.

The BIOS automatically detects the LAN while booting, and assigns
an IRQ level and I/O address. No jumpers or switches are required for
user configuration.

The drivers and installation instructions are located in the following
directories of the utility CD:

• Dos: Drivers for DOS platforms

• Info: Installation instructions

• Nwserver: Drivers for Novell NetWare

• Wfw: Drivers for Windows 3.11 for Workgroups

Please refer to the text files in the Info directory for detailed informa-
tion about installing the drivers.

Note:

Operating system vendors may post driver updates
on their websites. Please visit the websites of OS
vendors to download updated drivers.

Содержание PCA-6004











































































































Результаты поиска

Содержание PCA-6004

Отзывы:

Бренды по названию

Популярные бренды

Advantech PCA-6004, Руководство пользователя

Результаты поиска

Содержание PCA-6004

Отзывы:

Бренды по названию

Популярные бренды