manualshive.com logo in svg

Advantech PCA-6004, Руководство пользователя

Поделиться
Скачать
Advantech PCA-6004 Скачать руководство пользователя страница 62

4 8

PCA-6004 User's Manual

4.1

Before You Begin

To facilitate the installation of the enhanced display device drivers and
utility software, you should read the instructions in this chapter
carefully before you attempt installation. The enhanced display
drivers for the PCA-6004 board are located on the software installation
CD. You must install the drivers and utility software by using the
supplied SETUP program for DOS drivers.

Note:

The files on the software installation CD are com-
pressed. Do not attempt to install the drivers by
copying the files manually. You must use the supplied
SETUP program to install the drivers.

Before you begin, it is important to note that most display drivers
need to have the relevant software application already installed in the
system prior to installing the enhanced display drivers. In addition,
many of the installation procedures assume that you are familiar with
both the relevant software applications and operating system com-
mands. Review the relevant operating system commands and the
pertinent sections of your application software’s user’s manual before
performing the installation.

4.2

Features

• Chipset integrated high performance 3D graphic engine

• High speed internal AGP bus mastering data bus

• PC 99 compliant

• Support DVD playback & hardware motion compensation

• Integrated 230 MHz DAC allows 64K colors at 1280 x 1024 resolution

• User-friendly installation for Windows 95 and Windows NT

• AGP 1.0 interface

• Share system SDRAM up to 8 MB.

Содержание PCA-6004











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды