Advantech MIX-Q670A1, Руководство пользователя

Страница: 46 / 52

3-10
MIX-Q670A1
3.3.11 Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
NOTE:
The following items appear when you set Power Mode to [ATX Type].
Restore AC Power Loss [Always Off]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.
RI Wake Event [Disabled]
Enable or disable system to wake up from RI#. Configuration options: [Enabled]
[Disabled]
RTC Wake system from S5 [Disabled]
[Disabled] Disables system wake up from S5.
[Fixed Time] The system will wake up at the specified hr::min::sec.
[Dynamic Time] The system will wake up at the current time plus a specified
3.3.12 Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~DIO Port4 [Output]
Configuration options: [Input] [Output]
NOTE: The following item appears only when you set DIO Port1/2/3/4 to
[Output].
Output Level [High]
Configuration options: [High] [Low]
DIO Port5~DIO Port8 [Input]
Configuration options: [Input] [Output]
3.4 Chipset menu
The Chipset menu items allow you to change the settings for the chipset.