Advantech MIO-5270 Скачать руководство пользователя страница 6

Страница: 6 / 76

MIO-5270 User Manual

Optional MIOe Module

*MIOe-230 compatibility is optional by request.

Optional Accessories

Safety Instructions

Read these safety instructions carefully.

Keep this User Manual for later reference.

Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.

For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.

The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.

Position the power cord so that people cannot step on it. Do not place anything
over the power cord.

10.

All cautions and warnings on the equipment should be noted.

11.

If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.

12.

Never pour any liquid into an opening. This may cause fire or electrical shock.

13.

Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.

Part Number

Description

MIOe-210-D6A1E

4x RS232/422/485 2x RS422/485 with DSUB connector, 8-bit GPIO

MIOe-210-W6A1E

4x RS232/422/485 2x RS422/485 with Wafer connector, 8-bit GPIO

MIOe-220-L3A1E

3 x GbE with RJ45 connector

MIOe-220-B3A1E

3 x GbE with RJ45 connector through PCIE switch

MIOe-230-L0A1E*

Displayport to 48-bit LVDS

MIOe-230-D0A1E*

Displayport to Ext. Displayport

Part number

Description

1960054266T001

Heat spreader AMD-Ontario 137x84.2x16.7-SC MIO-5270

1703100260

Internal USB 5/6 cable

1935032000

Screw of Heatsink / Cooler R/S 5.5 2.0 +M M3*20L ST Ni

1910002088

The POST Stand off, F=M3*6L M=M3*5L B=5 H=16 Ni

1757003082

Adapter 100-240V 60W 12V 5A W/O PFC

Содержание MIO-5270













































































Результаты поиска

Содержание MIO-5270

Отзывы:

Похожие инструкции для MIO-5270

Бренды по названию

Популярные бренды

Advantech MIO-5270, Руководство пользователя

Результаты поиска

Содержание MIO-5270

Отзывы:

Похожие инструкции для MIO-5270

Бренды по названию

Популярные бренды