Advantech MICA-071, Руководство пользователя

Страница: 23 / 63

MICA Tablet PC User Manual 15
2.5 Docking Station LAN LED Signals
LAN
LED
Figure 2.19 LAN LED
LAN LED

Left (Active LED)
Data Traffic 10Base OFF

100Base Green Flashing
1000Base Yellow Flashing
No Data Traffic 10Base OFF

100Base Green
1000Base Yellow

Right (Link LED) Green
2.6 Running the BIOS Setup Program
Your MICA has most likely been properly set up and configured by your dealer prior to
delivery. You may still find it necessary to use the BIOS (Basic Input-Output System) setup
program to change system configuration information, such as the current date and time or
your type of hard drive. The setup program is stored in read-only memory. It can be
accessed by pressing the "Del" key on your keyboard immediately after powering on the
computer.
The settings you specify with the setup program are recorded in a special area of memory
called CMOS RAM. This memory is backed up by a battery so that it will not be erased
when you turn off or reset the system. Whenever you turn on the power, the system reads
the settings stored in CMOS RAM and compares them to the equipment check conducted
during the power on self-test (POST). If an error occurs, an error message will be displayed
on screen, and you will be prompted to run the setup program.
2.7 Installing System Software
Recent releases of operating systems from major vendors include setup programs which
load automatically and guide you through hard disk preparation and operating system
installation. The guidelines below will help you determine the steps necessary to install your
operating system on the tablet PC hard drive.
Activ
e
Link