MIC-7300 Startup Manual 3
1. Undo the four affixing screws and remove the rear
cover.
2. Undo the four affixing screws and remove the HDD
tray.
3. Undo the three affixing screws and remove the
memory cover.
4. Affix the thermal pad (P/N: 1990019498N000) to the
memory module and reassemble the system.
Note:
The thermal pad and memory cover must be in
direct contact and securely fitted.
Storage Installation
1. Undo the four affixing screws and remove the rear
cover.
2. Undo the four affixing screws and remove the HDD
tray.
3. Insert the HDD into the HDD tray and secure in place
using the four HDD screws (P/N:1930002235).
4. Connect the SATA and power cables.
5. Replace the HDD tray and secure in place using the
four screws provided. Then replace the rear cover and
secure in place using the four screws provided.
2
2
2
2
3
3
3
3
Mini PCIe Installation
MIC-7300 features one full-size mini PCIe slot. (This slot
also supports mSATA.)
1. Undo the affixing screws and remove the rear cover.
2. Install a mini PCIe module in the mini PCIe slot and
secure in place with screws.
3. Replace the rear cover.
Internal USB 2.0 Installation
1. Undo the affixing screws and remove the rear cover.
2. Loosen the bracket screws and adjust the size of the
bracket in accordance with the size of the USB dongle.
3. Secure the bracket in place by tightening the bracket
screws. Then replace the rear cover and secure in
place with screws.
Expansion Module Installation (Optional)
MIC-7300 can be equipped with the following optional
expansion modules to fulfill specific usage requirements:
•
32-bit GPIO modules (P/N: AIIS-DIO32-00A1E)
•
Isolated COM modules (P/N: 98R2C48510E)
1. Undo the four affixing screws and remove the rear
cover.
2. Remove the HDD tray and expansion module cover.
Then remove the COM cable.
3. Insert expansion modules into the slots on the mother-
board. (Note: 32-bit GPIO modules must be connected
by cable.)
4. Replace and secure the module cover. Replace and
secure the rear cover.
Initial Installation
(Cont.)
Initial Installation (Cont.)
