2 MIC-7300 Startup Manual
Physical Characteristics
•
Dimensions (W x H x D):
73 x 192 x 230 mm (2.87 x 7.55 x 9.05 in)
•
Weight:
2.9 kg (6.39 lb)
The board comprises multiple jumpers that allow the system
to be configured according to specific applications. The
function of every jumper and connector is listed in the table
below.
Connectors
Label
Function
DVI1
DVI connector
VGA1
VGA connector
COM 12
RS-232/422/485
COM 34
RS-232
USB12
USB 3.0
USB345678
USB 2.0
LAN 1
Intel i210AT
LAN 2
Intel i210AT
Audio
Audio jack (Line-Out, Mic-In)
LED 1234
COM 1/2 TX/RX LED
LED 5
HDD status
DC 9-36V
Power connector
DIO
8-bit DI/O
ON/OFF
Power on/off control
1
2
3
1
2
3
AT Module
ATX Module
PSON1: System AT/ATX Module Selection
Function
Jumper Setting
1-2
AT module
2-3
ATX module
Relevant drivers for MIC-7300 are provided on the software
installation CD. Please locate the driver folder and follow
the onscreen instructions for driver installation.
The computer is supplied with a battery-powered real-time
clock circuit. Batteries that are incorrectly replaced or
installed are at risk of exploding. Replace only with same
or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer’s
instructions.
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Memory Installation
MIC-7300 supports DDR3L SODIMM (non-ECC) memory
modules. Please contact your distributor or sales represen-
tative for a list of compatible memory modules.
COM1 TX/RX
COM2 TX/RX
Power Switch
USB12:USB3.0
COM 1/2
VGA
DVI
USB5678:USB2.0
COM 3/4
9~36 Vdc
Power on/off connector
LAN1/2
DIO
USB34:USB2.0
HDD LED
Specifications (Cont.)
Declaration of Conformity
System I/O
Initial Installation
Jumpers and Connectors
Software Installation
