Advantech MIC-5602, Руководство пользователя

Страница: 63 / 74

51 MIC-5602 User Manual
Chapter 5
M
MC Firmware
O
peration
- channel getaccess <channel number> [user id]
Get the access attributes associated with a specified SoL user.
- channel setaccess <channel number> <user id> [privilege=level]
With this parameter you can set a privilege level for a specified SoL user.
5.3.3.2 User Commands
To get an overview of all possible user commands please use the keyword "user"
only. This chapter only contains a description of the user commands supported by the
MIC-5602 for SOL.
- user set name <user id> [username]
This command can be used to change the SoL username.
- user set password <user id> [password]
This command can be is used change the SoL user password.
user@pramc:~$ ipmitool <connection-method> channel getaccess 1 2
Maximum User IDs : 2
Enabled User IDs : 2
User ID : 2
User Name : user
Fixed Name : Yes
Access Available : call-in / callback
Link Authentication : enabled
IPMI Messaging : enabled
Privilege Level : USER
user@pramc:~$ ipmitool <connection-method> channel setaccess 1 2 privilege=3
Note! The command can only be successfully used if the payload (x86) is
powered and active (green LED solid). Otherwise the MMC can't com-
municate with the 82571 GbE controller and will return completion code
0xFF (unspecified error).
user@pramc:~$ ipmitool <connection-method> user set name 2 newuser
Note! The command can only be successfully used if the payload (x86) is
powered and active (green LED solid). Otherwise the MMC can't com-
municate with the 82571 GbE controller and will return completion code
0xFF (unspecified error).
user@pramc:~$ ipmitool <connection-method> user set password 2 newpasswd
Note! The command can only be successfully used if the payload (x86) is
powered and active (green LED solid). Otherwise the MMC can't com-
municate with the 82571 GbE controller and will return completion code
0xFF (unspecified error).