background image

IPPC-7157 User Manual

36

Chapter 4  Award BIOS Setup

4.1  Award BIOS Setup

The IPPC-7157 comes with an Award BIOS chip that contains the ROM 
setup for your system. This chip serves as an interface between the pro-
cessor and the rest of the mainboard's components. This chapter explains 
the information contained in the setup program and tells you how to mod-
ify the settings according to your system configuration. Some setup items 
will not be explained, because it is recommended that users do not change 
such items.

4.2  CMOS Setup Utility

A setup program, built into the system BIOS, is stored in the CMOS 
RAM that allows the configuration settings to be changed. This program 
is executed when the user changes the system configuration; when the 
user changes the system backup battery; or when the system detects a 
configuration error and asks the user to run the setup program. At power-
on RAM testing, the message "Press DEL to enter Setup" appears. After 
pressing the "DEL" key, the CMOS setup utility screen will appear as 
shown in followings. Use the arrow keys to select and press "Enter" to 
run the selected program.

Note:

Values for the various setup items that appear on 
your own screen (including default values) may 
not be the same as the values shown on the 
screen figures in this chapter. This is because 
the BIOS is revised and updated from time to 
time. If in doubt, check Advantech's website for 
the latest BIOS versions and related information. 

    

Содержание IPPC-7157 Series





















































































Отзывы: