manualshive.com logo in svg

Advantech IPPC-6172A Series, Руководство пользователя

Поделиться
Скачать
Advantech IPPC-6172A Series Скачать руководство пользователя страница 34

IPPC-6172A User Manual

28

SATA#1 Configuration

The choices of SATA configuration are Disabled, Compatible, and Enhanced.

Configure SATA #1 as

This item allows to configure SATA as IDE, RAID, or AHCI.

SATA#2 Configuration

The choices of SATA configuration are Disabled and Enhanced.

Primary/Secondary IDE Master/Slave, Third/Fourth IDE Master, Fifth IDE Mas-
ter/Slave

Select one of the hard disk drives to configure it. Press <Enter> to access its the sub
menu. The options on the sub menu are described in the following sections.

IDE Detect Time Out (Sec)

Set this option to stop the AMIBIOS from searching for IDE devices within the speci-
fied number of seconds. Basically, this allows you to fine-tune the settings to allow for
faster boot times. Adjust this setting until a suitable timing that can detect all IDE disk
drives attached is found.
The default setting is 35.

Note!

IPPC-6172A supports RAID 0 or 1 so RAID recovery function is not 
available in Intel Matrix Storage utility.

Option

Description

0

This value is the best setting to use if the onboard IDE controllers are 
set to a specific IDE disk drive in the AMIBIOS.

5

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in five seconds. A large majority of ultra ATA hard disk 
drives can be detected well within five seconds.

10

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in 10 seconds.

15

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in 15 seconds.

20

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in 20 seconds.

25

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in 25 seconds.

30

Set this value to stop the AMIBIOS from searching the IDE bus for 
IDE disk drives in 30 seconds.

35

35 is the default value. It is the recommended setting when all IDE 
connectors are set to AUTO in the AMIBIOS setting.

Содержание IPPC-6172A Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды