Advantech ICR-3831, Руководство пользователя

Страница: 6 / 8

Start Guide
3. Power
The router requires an external DC power supply. The DC voltage required is between
+12 to +48 V DC. The router has built-in protection against reverse polarity without signaling.
Connect the power supply cable to the PWR connector on the rear panel of the router (see the
figure below).
4. Ethernet
An Ethernet cable may be connected to the ETH0 connector on the rear panel of the router
(see the figure above). By default, the Ethernet port is configured as follows:
Connector Purpose Default Setting
ETH0
LAN port (default)
Connect your laptop or PC to this port to
get a local web-server for device configu-
ration and diagnostics.
DHCP Server enabled
IP Address: 192.168.1.1
NetMask: 255.255.255.0
QSG-0007-EN, April 29, 2020 5 Released in the Czech Republic