Advantech FPM-37S, Инструкция по эксплуатации

Страница: 33 / 34

Appendix A Touchscreen Driver Installation 27
STEP 4 - INSTALL THE TOUCHSCREEN CONTROL PANEL
The touchscreen control panel software program, ELOCAL2.EXE, is
a presentation manager application for calibrating the touchscreen and
setting various options.
Add the \ELO\ELOCAL2.EXE program to the System Setup folder
and label the icon “Touchscreen”. This is accomplished as follows:
1. Open the OS/2 System folder, then System Setup.
2. Open the Templates folder.
3. Drag the Program template with the right mouse button into the
System Setup folder. A Settings notebook will be displayed.
4. Enter “C:\ELO\ELOCAL2.EXE” as the path and file name. Enter
“C:\ELO” as the working directory.
5. Select the "General" tab. Change the Title to “Touchscreen”.
6. Close the notebook.
See your OS/2 documentation for detailed instructions on installing
new applications.
STEP 5 - CALIBRATE THE TOUCHSCREEN
Double-click the Touchscreen icon with the mouse (as the
touchscreen may not be calibrated yet), or use the keyboard if the
mouse is not connected. You may also run ELOCAL2.EXE from an
OS/2 Window prompt.
Select "Calibrate" and follow the on-screen instructions. After
calibrating, the touchscreen will work like the mouse. The
DEVICE=MONMOUxx command in CONFIG.SYS is updated with
the new calibration points (-c flag). The calibration points are then set
automatically each time the system is started. Recalibration should
only be necessary after moving or resizing the video image, or after
changing either the touchscreen, controller, or monitor.
Close the touchscreen control panel.