Advantech FPM-37S, Инструкция по эксплуатации

Страница: 32 / 34

26 FPM-37T/S User's Manual
<COM port> is:
the number of the COM port where the serial output of the
touchscreen controller is connected.
<baud rate>
matches the switch or jumper settings on the controller.
Example MonitorMouse for OS/2 DEVICE command:
Device=c:\elo\monmou01.sys 2210,1,9600
No Mouse
If you do not wish to have a mouse connected, change the
“stype=elomou$” flag to “type=elomou$” on the
DEVICE=MOUSE.SYS command.
Disabling the COM Drivers
If your system COM ports are being used by the touchscreen and
mouse, REM out the DEVICE=COM.SYS and DEVICE=VCOM.SYS
commands (if present) in CONFIG.SYS. This prevents the COM
drivers from displaying amessage saying the COM port is unavailable.
If only the touchscreen is using a COM port, move the
DEVICE=COM.SYS and DEVICE=VCOM.SYS commands before
the DEVICE=MONMOU02.SYS command in CONFIG.SYS. Then
add the flag (<COM Port>,0,0) to COM.SYS, where <COM Port> is
the same as on the DEVICE=MONMOU01.SYS command. For
example:
Device=c:\os2\com.sys (1,0,0)