Advantech EPC-P30X6 Series, Руководство пользователя

Страница: 5 / 66

v EPC-P30X6 User Manual
/ 用户手册
Declaration of Conformity
/ 符合性声明 / 符合性聲明
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
本产品已经通过 CE 环境规格检测。测试条件之一是在工业环境中进行产品操作。为了
使产品免受 ESD （静电放电）和 EMI 泄露造成的损害，强烈建议用户使用符合 CE 标准
的工业产品。
本產品已經通過 CE 環境規格檢測。測試條件之一是在工業環境中進行產品操作。為了
使產品免受 ESD （靜電放電）和 EMI 洩露造成的損害，強烈建議用戶使用符合 CE 標準
的工業產品。
FCC Class B
/FCC B 级 /FCC B 級
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC B 级
根据 FCC 规则第 15 款，本设备已经过检测并被判定符合 B 级数字设备标准。这些限制
旨在为居住环境下的系统操作提供合理保护，使其免受有害干扰。本设备会产生、使
用和发射无线电频率能量。如果没有按照手册说明正确安装和使用，可能对无线电通
讯造成有害干扰。但即使按照手册说明进行安装和使用，也并不能保证不会产生干扰。
若本设备会对无线电或电视信号接收产生有害干扰，用户可通过开、关设备进行确认。
当本设备产生有害干扰时，用户可采取下面的措施来解决干扰问题：

调整接收天线的方向或位置

增大本设备与接收器之间的距离
 将本设备的电源接头插在与接收器使用不同电路的电源插座

若需技术支持，请咨询经销商或经验丰富的无线电 / 电视技术人员