Advantech EKI-7758F, Руководство пользователя

Страница: 68 / 149

EKI-7758F User Manual 54
3.2.2 Port
Port Statistics
The following information provides the current port statistic information.
•
Port:
The port number.
•
Type:
Displays the current speed of connection to the port.
•
Link:
The status of linking—‘Up’ or ‘Down’.
•
State:
It’s set by Port Control. When the state is disabled, the port will not transmit or receive any
packet.
•
Tx Good Packet:
The counts of transmitting good packets via this port.
•
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less than 64 octets],
oversize, CRC Align errors, fragments and jabbers packets) via this port.
•
Rx Good Packet:
The counts of receiving good packets via this port.
•
Rx Bad Packet:
The counts of receiving good packets (including undersize [less than 64 octets],
oversize, CRC error, fragments and jabbers) via this port.
•
Tx Abort Packet:
The aborted packet while transmitting.
•
Packet Collision:
The counts of collision packet.
•
Packet Dropped:
The counts of dropped packet.
•
Rx Bcast Packet:
The counts of broadcast packet.
•
Rx Mcast Packet:
The counts of multicast packet.
•
click
Apply
button to apply the configuration.
Figure 3.23: Port Statistics
Port Control
In Port control, you can view every port status that depended on user setting and the negotiation result.
•
Port:
select the port that you want to configure.
•
State:
current port status. The port can be set to disable or enable mode. If the port setting is disable
then will not receive or transmit any packet.
•
Negotiation:
set auto negotiation status of port.
•
Speed:
set the port link speed.
•
Duplex:
set full-duplex or half-duplex mode of the port.
•
Flow Control:
set flow control function is Symmetric or Asymmetric in Full Duplex mode. The default
value is Symmetric.
•
Security:
when its state is “On” that means this port accepts only one MAC address.