Advantech EKI-7758F, Руководство пользователя

Страница: 40 / 149

EKI-7758F User Manual 26
After you have logged in to the system, you will see a command prompt. To enter CLI management interface,
type in “
enable
” command.
Figure 3.4: Command Line Interface
The following table lists the CLI commands and description.
3.1.1 Commands Level
Table 3.1: Command Level
Modes Access Method Prompt Exit Method About This Model
User EXEC
Begin a session with
your switch.
switch>
Enter
logout
or
quit
. The user commands available
at
the user level are a subset of
those available at the
privileged level.
Use this mode to
•
Perform basic tests.
•
Display system information.
Privileged
EXEC
Enter the
enable
command while in
user EXEC mode.
switch#
Enter
disable
to exit. The privileged command is
advance mode
Privileged this mode to
•
Display advance function
status
•
save configures
Global
configuration
Enter the
configure
command while in
privileged EXEC
mode.
switch(config)#
To exit to privileged
EXEC mode, enter
exit
or
end
Use this mode to configure
parameters that apply to your
switch as a whole.
VLAN database
Enter the
vlan
database
command
while in privileged
EXEC mode.
switch(vlan)#
To exit to user EXEC
mode, enter
exit
.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface
command (with a
specific interface)
while in global
configuration mode
switch(config-if)#
To exit to global
configuration mode,
enter
exit
.
To exist to privileged
EXEC mode, or
end.
Use this mode to configure
parameters for the switch and
Ethernet ports.