Advantech EKI-7710 Series Скачать руководство пользователя страница 71

Страница: 71 / 156

EKI-7710 Series User Manual

The following table describes the items in the previous figure.

The ensuing table for

IGMP Querier Status

settings are informational only: VLAN ID,

Querier State, Querier Status, Querier Version and Querier IP.
IGMP Static Groups
To access this page, click

L2 Switching

Multicast

IGMP Snooping

IGMP

Static

Groups.

Figure 4.33 L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups

The following table describes the items in the previous figure.

The ensuing table for

IGMP Static Groups Status

settings are informational only:

VLAN ID, Group IP Address, Member Ports and Modify.
Multicast Groups
To access this page, click

L2 Switching

Multicast

IGMP Snooping

Multicast

Groups

The ensuing table for

Multicast Groups

settings are informational only: VLAN ID,

Group IP Address, Member Ports, Type and Life (Sec).
Router Ports
To access this page, click

L2 Switching

Multicast

IGMP Snooping

Router

Ports

The ensuing table for

Router Ports

settings are informational only: VLAN ID, Port

and Expiry Time (Sec).

4.5.8.3

MLD Snooping

The MLD Snooping page allows you to select the snooping status (enable or dis-

able), the version (v1 or v2) and the enabling/disabling of the report suppression for

the MLD querier, which sends out periodic general MLD queries and are forwarded

through all ports in the VLAN.
MLD Settings

Item

Description

VLAN ID

Select the VLAN ID to define the local IGMP querier.

Querier State

Select

Disable

Enable

to configure the VLAN ID (IGMP Querier).

Querier Version

Select the querier version (V2 or V3) designated to the selected VLAN

ID.

Apply

Click

Apply

to save the values and update the screen.

Item

Description

VLAN ID

Select the VLAN ID to define IGMP static group.

Group IP Address

Enter the IP address assigned to the VLAN ID.

Member Ports

Enter the port numbers to associate with the static group.

Add

Click

Add

to add an IGMP group.

Содержание EKI-7710 Series





























































































































































Результаты поиска

Содержание EKI-7710 Series

Отзывы:

Похожие инструкции для EKI-7710 Series

Бренды по названию

Популярные бренды

Advantech EKI-7710 Series, Руководство пользователя

Результаты поиска

Содержание EKI-7710 Series

Отзывы:

Похожие инструкции для EKI-7710 Series

Бренды по названию

Популярные бренды